| HOME | ABOUT US | PRODUCTS | GALLERY | WHERE TO BUY | CONTACT US |
SCM-10v2
High Intensity Underwater LED Light
v2 Improvements
- Upgradeable to strobe capability with addition of strobe module. (module not yet available)
- Reverse polarity protection
- Improved power conditioning
- New molded cable strain relief and water seal
- New submersible grade cable
- Better corrosion resistance with all passivated 316 stainless steel bezel, back plate, and screws
- Higher polish on stainless bezel and back plate
Specifications
- 42 Watts of high efficiency LED light
- Internal digital switching power supply operates at 94% efficiency
- Size: 10” Wide x 2.25” Tall x 1/2" Thick
- Weight: 1.5 Lbs
- Operating Voltage: 9 to 30 Volts DC (brightness does not change)
- Current Draw: 3.5 Amps at 12 Volts
- Housing Materials: Passivated 316 Stainless Steel with Polycarbonate Lens
- Standard Wire Length: 20 ft
- Lamp Life: 40000 Hours
- Warranty: 2 YearsInstallation Instructions & Mechanical Outline
Features
Available in 4 Brilliant LED colors:
- Great White - Brightest. If your looking for simple and bright then look no further.
- Aqua Green - Perceived as the best for attracting fish, easily penetrates the water.
- Bimini Blue - Most Popular. The light blue color penetrates the water, attracts sea life, adds amazing ambiance to your night life on the water. Makes brown murky water behind your boat look like a swimming pool!
- Ultra-Blue - Deep blue with a component of ultra-violet light brings a high-tech ambiance to the water around you, causes fluorescent objects to illuminate, attracts sea life, gives your boat a distinguishable look.
- Low power consumption – Internal digital switching power supply operates at 94% efficiency, making it ideal for any size boat. Current draw is only 3.5 amps at 12 volts.
- No extra modules required - Entirely self contained, there is no additional driver or power supply to install.
- High Intensity – Careful thermal management allows high intensity with light output of over 2000 lumens
- Long life – LEDs offer over 40000 hour lifetime
- Internal surge suppression - Marine electrical systems are plagued with transient voltage spikes. Shadow-Casters are protected from these spikes by an internal suppression device.
- Internal temperature protection - Internal self protection circuitry means Shadow-Casters will never get hot enough to burn you or your gel coat.
- Rugged design - 316 Stainless Steel and polycarbonate housing designed by engineers with years of experience in military product design. Shock and vibration resistant for operation at any speed. Stainless steel bezel prevents any damage to the light during installation. The light can actually flex to conform to up to 3/16" hull curvature over the length of the light.
- Attract sea life - Reports are posted in forums everywhere boasting things caught with lights from Tuna, Swordfish, Snapper, Snook, as well as other game fish. See videos.
- Surface mounting - The SCM-10 model needs no major hull penetration below the waterline, only two mounting screws and a small hole for the wire.
Shadow-Caster brings you the best value in high performance underwater LED lighting. Why pay more for less?
| HOME | ABOUT US | PRODUCTS | GALLERY | WHERE TO BUY | CONTACT US |
Shadow-Caster LED Lighting, LLC (C) 2008. All Rights Reserved.
